Wholesale PCBA Design

Product Detail

Technical Detail for PCB:




PCB Capacity for Mass Production
Features	Mass Capability
Layers	1-38 layers
Board material type	FR4(Standard FR4, Mid-Tg FR4,Hi-Tg FR4),CEM-1,ceramic substrate board, aluminum based board, Rogers , Teflon and more
Max. PCB Panel Size	660*600mm
Board thickness coverage	.016"-.126"(0.4mm-3.2mm)
Min. Board Thickness	2L:0.2mm
	4L:0.4mm
	6L:0.8mm
Board thickness tolerance	±10%
Min Inner Layer Tracing/Spacing	0.1mm(4mil)
Min outside layer Min Tracing/Spacing	0.075mm(3/3mil)
Min drilling Hole diameter	0.15mm(6mil)
Min plated hole thickness	20um(0.8mil)
Min Blind/Buried hole size	0.2mm(8mil)
Min Annular Ring	±0.076mm(±3mil)
Hole Position Deviation	±0.05mm(±2mil)
Min width of cutout (NPTH)	0.8mm
Min width of slot hole (PTH)	0.6mm
Solder mask color	LPI, Green, Green matt, Black, Black Matt, White, Red, Yellow, Blue
Silkscreen color	White, Yellow, Red, Black
Surface finish	HASL ,Lead Free HASL
	ENIG, Immersion Tin - RoHS
	OSP, ENIG+OSP, Immersion Silver, Gold Finger
Special Process	Buried Hole,Blind Hole, Embedded Resistance, Back drillingand Resistance Control.
Outline	Routing, V-Groove, Beveling punch
Outline Tolerance	±0.15mm ±6mil
Board thickness tolerance	+/-0.1mm ~ +/-10%
Board size tolerance	+/-0.1mm~+/-0.3mm
PTH hole size tolerance	+/-.003"(+/-0.08mm)~+/-.006"(+/-0.15mm)
NPTH hole size tolerance	+/-.002"(+/-0.05mm)
Controlled Impedance	+/- 10%
Insulation Resistance	1×1012O(Normal)
Through Hole Resistance	<300O(Normal)
Thermal Shock	3×10sec@288?
Warp and Twist	=0.7%
Electric Strength	>1.3KV/mm
Peel Strength	1.4N/mm
Solder Mask Abrasion	>6H
Flammability	94V-0
Test Voltage	50-330V




PCB Assembly Capabilities:

Quantity	Prototype&Low Volume PCB Assembly,from 1 Board to 250,is specialty,or up to 1000
Type of Assembly	SMT,Thru-hole
Solder Type	Water Soluble Solder Paste,Leaded and Lead-Free
Components	Passive Down to 0201 size
	BGA and VFBGA
	Leadless Chip Carriers/CSP
	Double-sided SMT Assembly
	Fine Pitch to 0.8mils
	BGA Repair and Reball
	Part Removal and Replacement
Bare Board Size	Smallest:0.25*0.25 inches
	Largest:20*20 inches
File Formate	Bill of Materials
	Gerber files
	Pick-N-Place file
Types of Service	Turn-key,partial turn-key or consignment
Component packaging	Cut Tape,Tube,Reels,Loose Parts
Turn Time	Same day service to 15 days service
Testing	Flying Probe Test,X-ray Inspection AOI Test
PCB assembly process	Drilling-----Exposure-----Plating-----Etaching & Stripping-----Punching-----Electrical Testing-----SMT-----Wave Soldering-----Assembling-----ICT-----Function Testing-----Temperature & Humidity Testing

  

Our Superiority

1.High efficiency&Experience

We can provide one stop service.Established in 2004, with many years hard-working and constant innovation,we have grown up into a professional PCB&PCBA manufacturer. We have our own independent research and development department and sophisticated quality control system.




2.Quality

Our product are manufactured according to the UL/Rohs standards to insure quality assemblies from start to finish. Whether it's a simple custom or not.Product or a complex turnkey production run, We will adhere to the highest quality standards.

 

3.Protecting your interests

Protecting your Intellectual Property is job one! Our staff of trained professionals are all working under a strict confidentiality contract and treat your important documentation as they would their own.




4.Service

We can provide 24hours service for you. We pride ourselves on our ability to custom tailor programs around our customers' needs.We take time to listen to your unique business needs and then set out to surpass them.




Our PCB board manufacture and PCB Assembly service

* PCB board file with parts list provided by customers

* PCB board made, circuit board parts purchased by us

* PCB board with parts assembled

* Electronic testing circuit board or PCBA

* Fast delivery, anti-static package

* RoHS Directive-compliant, lead-free

* One stop service for PCB design, PCB layout, PCB manufacture, components purchasing, PCB assembly, test, packing and PCB delivery

 

Workshop :

 

 

Exhibition:

 

 

FAQ:

1.How to contact us?
Answer: You can contact online or send us email for any question.

 

2.How to start an inquiry?
Answer: Please send us full manufacture requirements and documents for quotation, i.e. gerber files, BOM, samples if it is necessary.

 

3.What are your main services?
Answer: We offer one-stop service of PCB/PCBA manufacture, including PCB design, PCB manufacture, component sourcing, assembly (SMT, DIP,COB).




4.Do you offer prototype production? What is the lead time?
Answer: We can offer both sample and mass production. The fastest lead time for double-sided samples is 36 hours. PCBA prototype can be 48 hours including both BOM sourcing and SMT.

 

5.How is your quality?
Answer: We test both PCB and key components 100% before delivery. Aim to set up long term cooperation with customers. We provide products with reliable quality.

 

6.What is your warranty?
Answer: 2 years

 

7.What is the shipping cost?

 Answer:The shipping cost is determined by the destination, weight, packing size of the goods. Please let us know if you need us to quote you the shipping cost.